Uninterruptible Power Supply
Power Management Software UPS1000 (Interface:UBS Port)
• Support Window Family, Linux, Sun Solaris, IBM Aix, Compaq True 64, Free BSD, HP-UX, Max
• Power Flow Display for Monitoring UPS Status
• Schedules System Shutdown/Restart
• Warning Notification
Additional Information
Capacity
1000mA
LED Indicator
Input Voltage, Output Voltage, Battery Capacity, Load Level, UPS Status
Dimension (W x H x D mm)
130 x 182 x 320
Noise Level
Less Than 40dB
Operating Environment
0-40°C, 0-90% Relative Humidity
(Non-Condensing)Phone/Fax/Modem/Network Protection
RJ45 (1 in 1 out)
Overload, Short Circuit Protection
Yes
Spike, Surge & Lightning Protection
Yes
Audible Alarm
Battery Mode, Low Battery, Overload, UPS Fault
Recharges Time
4-6 Hours to 90% after complete discharge
Input/Output Voltage
220V/230V/240V
Back Up Time (Depending on Load)
30-40 minutes
Sealed Lead Acid maintenance Free Batt
2 x 12V 7Ah
Output Socket
4 x British Socket
Transfer Time (Typical)
2ms – 6ms
Output Waveform
Simulated Sinewave
Input/Output Freq
50 or 60Hz (+/- 1 Hz)
Input Voltage Range
162-290Vac
Weight (Kg)
8
Attachment